|
This gauging systems photoelectrically detects a moving amount of feelers or spindles which go straight and digital indicate the measuring length. It defer from dial gauges in the mechanism which change straight displacement into revolution amount therefore you can get highest accurate measuring values in the whole measuring range. This system also is applicable for setting in the machineres since the
gauges and Counters are separated and can used far from the measuring place.
|
|
■Digital Dial Gauges (Detectors)
|
|
Orighinal detecting function are programmed hence it is not necessary for setting the original whenever you switch off. it is designed compactly for setting into the device and machineries.
|
|
|
|
|
|
|
| Model |
IPD-B505/05M |
IPD-B505/2M |
IPD-B505/2M-03N |
| Range |
5mm |
| Resolution |
0.5μm |
| Accuracy |
1μm
or Less |
| Measuring
Force |
1.08N
or Less |
0.3N
or Less |
| Response
Speed |
1000mm/sec |
| IP
Protection Level |
IP66
Equivalent |
| Origin
Position |
About
1.3mm from the bottom |
| Weight |
Approx.
63g |
Approx.
110g |
| Cable
Length |
0.5m |
2m |
| Standard
Attachment |
ContactPoint
: F-201, Rubber Bellows : M132 |
|
|
|
IPD-P501【Resolution : 0.5μm Range : 10mm】
|
|
|
|
IPD-P510N【Nut-installed type】
|
|
|
Specifications
|
| Model |
IPD-P501/2M |
IPD-P501/2M-03N |
IPD-510N/2M |
IPD-P510N/2M-03N |
| Range |
10mm |
| Resolution |
0.5μm |
| Accuracy |
1μm
or less |
| Measuring
force |
1.08N
or less |
0.3N
or less |
1.08N
or less |
0.3N
or less |
| Response
speed |
2000mm/sec |
| IP
Protection level |
IP67
equivalent |
| Origin
position |
About
2mm from the bottom |
| Weight |
Approx.
130g |
| Cable
length |
2m |
| Standard
Attachments |
Contact
point F-201 |
| Rubber
bellows M-137 |
|
|
|
|
|
A sample image: Installation of multiple
detector sets
Size reduction enabled the high-density layout of a number of detectors. This contributes to the device size reduction. |
|
|
|
Counters
|
