represents Japanese best quality manufactures in the various Industrial fields

Features 
・Sub-zero teratment is done to prevent  distortion throughout years use. 
  And it is finished with high grade precision  grinding which is the same 
  method to be applied for manufacturing for block gauges. 
  Hight : 50mm　±　0.0025　　

  Repeatability : 5/   1000mm 
  Parallelism : 5/1000mm　　　

  Operating time :  10 sec. 
・It can be used both for ferrous and  nonferrous meterials. 
  (ask about application) 
・One piece of lithium battery(3V) last for one  year. 
・It is not affected with cutting oil. 
・It has 5mm axial stroke of allowance for over-run.

Features 
・Equipped with ultra-sensitive IC board for very

   precise measurements. 
  (Prevents the occurrence of chattering.) 
・Buzzer included with all models. 
・Wide range of replaceble stylus with diameters

  starting from φ1. 
・Can be used with both iron and nonferrous

  metals. 
  (conductive sprayor gold foil is used for

   nonfreeous metals.) 
・Accurate measurements of even very thin

  works are possible due to the 
  light pressure between the stylus and work. 
・Stylus securely swings in the X, Y and Z

  directions. 
・Commercial batteries will last one year. 

Features 
・Small diameter's center head is suitable for

   high-speed cutting. 
・All center heads can be changed quickly and

  easily by special taper mount. 
・Long tool life by dust-proof cap. 
・A-type center head is attached as standard

  accessory